the natural, stress free way to wake up

SRS 100

SRS150

SRS200/210

SRS260

SRS300 i-Lite

SRS320

SRS 100UK, SRS 100EU, SRS 100US Technical Support

 

I cannot activate the alarm when pressing the alarm button and the alarm symbol doesn't appear.

Ensure Security Mode is switched OFF. Is the Security Mode 'house' symbol displayed?

The sunrise (or alarm) and the sunset cannot be activated when Security Mode is switched ON.

 

I cannot access the Menu to set up my Sunrise System.

Ensure the alarm is switched OFF. Is the 'alarm clock' symbol displayed? Some Menu functions are locked out when the alarm is ON. Press the alarm button to de-activate the alarm whilst you set up the product.

 

Nightlight Level

If you have the nightlight level at maximum brightness and the nightlight ON, when you press the alarm button to set the sunrise or alarm the light will come on at full brightness or to the level you have set the nightlight. To adjust this, either lower the nightlight level within the Menu or set the nightlight to OFF

in the Menu.

 

Can the product be reset to factory default settings?

Yes.

1. First unplug the SRS 100 from the mains supply and wait for 10 seconds.

2. Plug the product back into the mains supply and wait until the display shows SRS 100.

3. When the display shows SRS 100 momentarily press the SET button.

If the reset is successful the display will show VERSION with a number.

4. You will need to re-enter your Menu options.

 

I have an older model SRS 100 and can't exit the sunset/sunrise function.

Your product may be in 'demonstration mode'. To exit this mode and return your product to normal function:

Unplug the product from the mains supply.

Press and hold the + button for more than 12 seconds.

 

If your question is not answered here email: info@morningsunrise.com for free technical support and product information.

SRS 150UK, SRS 150EU, SRS 150US Technical Support

 

How do I generate a Sunrise?

The Sunrise works in conjunction with the alarm time. First set the alarm time (see page 5 of your user guide) then choose the desired Sunrise duration from the Menu (e.g set to 15 minutes). Activate the alarm by pressing the alarm button (top left). The Sunrise will start 15 minutes before the alarm time and the lamp will be at full brightness after 15 minutes.

 

How do I generate a Sunset?

Press the product UP button until the light is set to the desired brightness level or press the zzZ SNOOZE button to turn the lamp full ON. To activate the Sunset press the Sleep button (z). The lamp will slowly dim and switch off. The Sunset duration can be set between 5 - 90 minutes within the Menu. If the radio nor MP3 is playing either will switch off after the Sunset is completed.

 

How do I switch off the lamp after a Sunrise?

Press the ALARM button to switch the alarm off, then press the zzZ SNOOZE button to turn the lamp OFF.

 

Can the unit be reset to factory default settings?

Yes. To perform a factory reset disconnect your SRS150 from your lamp and follow these instructions:

1. Unplug the product from the mains power supply.

2. Press and hold the MENU button and plug the product back into the mains power supply while still holding the Menu button.

3. The display will show VERSION xxx for example. Now release the MENU button.

4. After a short delay the SRS 150 will restart with factory defaults loaded.

 

Can I use any light bulb in the lamp attached to my Sunrise System 150?

No, you must use a regular tungsten light bulb to the recommended wattage for your bedside lamp. The SRS 150 will not work properly if an energy saver, fluorescent, 3 way or LED light bulb is used. The product can be used with a halogen low energy bulb.

 

If your question is not answered here email: info@morningsunrise.com for free technical support and product information.

SRS 200UK, SRS 200EU, SRS 200US - SRS 210US Technical Support

 

How do I generate a Sunrise?

Press the UP button until the lamp is set to the desired brightness level. To activate the Sunset press the ALARM button. The lamp will slowly dim and switch off. The default is 15 minutes. The duration of the Sunset can be set within the Menu under the SUNSET option. Choose between 15 - 90 minutes.

 

I cannot activate the alarm when pressing the alarm button and the Alarm symbol (alarm clock) doesn't appear on the display screen.

Ensure Security Mode is set to OFF. If the Security Mode 'house' symbol is displayed this indicates that Security Mode is ON. Press the Security button (house) to deactivate.

 

Can I reset my SRS 200 /210 to factory default settings?

Yes, reset the product by the following process:

1. Unplug the product from the mains power supply and wait 5 - 10 seconds.

2. Plug back in.

3. Wait for the display screen to show 'Sunrise System'

4. Press and release the Menu button.

5. If the reset is successful the display screen will show a version number, for example Version 1.03.

 

If the version number is not displayed repeat the above steps paying particular attention to to steps 3 and 4.

 

Can I use any light bulb in my SRS 200 or SRS 210?

No, you must use a regular or halogen tungsten light bulb. The maximum wattage of the light bulb must be no more than 60W. The Sunrise System will not work properly if an energy saving fluorescent type bulb, 3 way or LED bulb is used. A low energy halogen light bulb is suitable and these are available from the Sunrise System shop and good electrical retailers. These light bulbs offer an approximate 30% energy saving over ordinary bulbs.

 

 

If your question is not answered here email: info@morningsunrise.com for free technical support and product information.

SRS 260UK, SRS 260EU, SRS 260US Technical Support

 

Can I reset my SRS 260 to factory default settings?

Yes, reset the product by the following process:

1. Unplug the product from the mains power supply .

2. Press and hold the Menu button and plug the SRS 260 back in to the mains power supply while still pressing the Menu button.

3. Wait for the display screen to show  a version#, Version 1.0 for example. Now release the Menu button.

4. After a short delay the SRS 260 will restart with the factory defaults loaded.

 

How do I generate a Sunrise?

The Sunrise works in conjunction with the alarm time. First set the alarm time (see page 5 of your user guide) then choose the desired Sunrise duration from the Menu (e.g set to 15 minutes). Activate the alarm by pressing the alarm button (front right). The Sunrise will start 15 minutes before the alarm time and the lamp will be at full brightness after 15 minutes (when a duration of 15 minutes is set).

 

How do I generate a Sunset?

Press the product UP button until the light is set to the desired brightness level or press the zzZ SNOOZE button to turn the lamp full ON. To activate the Sunset press the Sleep button (z) repeatedly until the desired Sunset duration is displayed, from between 5 - 90 minutes. The lamp will slowly dim and switch off. If the radio nor MP3 is playing either will switch off after the Sunset is completed.

 

How do I switch the light off after a Sunrise?

Press the ALARM button to switch the alarm off, then press the zzZ SNOOZE button to turn the lamp OFF.

 

Where can I purchase SD cards and accessories for my Sunrise System 260 or 150?

SD cards and energy saving halogen light bulbs are available from the Sunrise System shop.

 

Can I use any light bulb in my SRS 260 ?

No, you must use a regular or halogen tungsten light bulb. The maximum wattage of the light bulb must be no more than 60W. The Sunrise System will not work properly if an energy saving fluorescent type bulb, 3 way or LED bulb is used. A tungsten daylight bulb up to 60W may also be used. A low energy halogen light bulb is suitable and these are available from the Sunrise System shop and good electrical retailers. Halogen light bulbs offer an approximate 30% energy saving over ordinary bulbs.

 

If your question is not answered here email: info@morningsunrise.com for free technical support and product information.

SRS 300 i-Lite Technical Support

 

Setting up the Sunrise System i-Lite (SRS 300)

The first time the Sunrise System i-Lite is unpacked you will need to remove the packing material protecting the product and gently clean it with a soft cloth to remove any dust. Plug the correct mains cable for your country into the back of the i-Lite and plug the other end of the cable into the mains power supply. The On/Off switch marked 0/I is located on the back of the product.

 

How do I change the light bulbs inside the SRS 300?

The SRS 300 uses replacement bulb type CF-L 24W, 5900 Kelvin which are available from www.morningsunrise.com or a good electrical supplier.

 

Changing the light bulbs.

Always disconnect the light box from the mains before opening it.

 

1. Unplug the product and remove the four screws on the back using a compatible screwdriver.

2. Unpack the replacement light bulb(s).

3. Cut the retaining cable ties which may have been used to secure the bulbs inside the light box during transit. Remove the failed light bulb(s) and dispose of responsibly at a light bulb recycling collection point.

4. Insert the new light bulb(s) and snap gently into the light bulb holder.

5. Assemble the SRS 300 casing and replace the four screws.

6. Plug in the SRS 300 to test.

 

 

If your question is not answered here email: info@morningsunrise.com for free technical support and product information.

SRS 320 Technical Support

 

Can I reset my SRS 320 to factory default settings?

Yes, reset the product by the following process:

1. Unplug the product from the mains power supply and wait for 10 seconds.

2. Plug the SRS 320 back in to the mains power supply and wait until the display shows SRS 320.

3. Next, momentarily press the Menu (M) button.

4. If the reset is successful the display will show VERSION and a number. If unsuccessful try again paying particular attention to actions 2 and 3.

 

How do I generate a Sunrise?

The Sunrise works in conjunction with the alarm time. First set the alarm time (see page 6 & 7 of your user guide) then choose the desired Sunrise duration from the Menu (e.g set to 15 minutes). Activate the alarm by pressing the alarm button (top left). The Sunrise will start 15 minutes before the alarm time and the lamp will be at full brightness after 15 minutes (when a duration of 15 minutes is set).

 

How do I generate a Sunset?

Press the product + button until the light is set to the desired brightness level or press the zzZ SNOOZE button to turn the lamp full ON. To activate the Sunset press the alarm button. The light will slowly dim and switch off. The default setting is 15 minutes. If you wish to change the duration of the Sunrise or Sunrise follow the instruction on page 6 and 7 of your user guide which is also available as a pdf file on the SRS 320 product page.

 

How do I cancel the light box timer?

Press any other button apart from the SNOOZE (zzZ) button.

 

How do I switch my Sunrise System light box off after a Sunrise?

Press the ALARM button ONCE to switch the alarm off for that day, then press the zzZ SNOOZE button to turn the lamp OFF. If you press the ALARM button twice the alarm will be off completely.

 

If your question is not answered here email: info@morningsunrise.com for free technical support and product information.